Discreet Packaging

We won't tell if you don't

Free Shipping

Free delivery on orders over £50

Secure Payment

Pay by debit card or with cryptocurrency


Rotary Evaporator 5L Manual Kit with 5L Chiller - 40



BHO Hardware has put together this entry level kit which is great for the hobbyist that wants to be able to work for a few hours per day.  The rotary evaporator has a manual lift bath which the user can move up and down using the screw handle on the front of the unit. 

Rotary Evaporator

This model comes with a 5ltr rotary flask and a 3 ltr receiving flask.  This model has an inflow tap shown in the picture top left which enables the system to draw starting mixture from a reservoir through into the rotary flask the fluid is drawn into the system by negative pressure created by the recirculating water pump.  The tap can be closed to control the amount of fluid being drawn into the rotating flask.

The receiving flask has a release valve at the bottom enabling the user to release the evaporated fluid from the system without dismantling the unit.

The temperature of the bath is controlled via the panel to the right of the water bath and the RPM of the rotating flask is controlled via the panel in the top centre of the system with the pressure gauge just below.

Recirculating Water Pump

The vacuum on this kit we have put together is created by the water recirculating pump, which saves the user needing a cold trap. Solvent vapours do not affect the water recirculator. 


The Chiller keeps the condensing coil at the correct temperature.  This model has a large opening on the top which makes filling and cleaning this unit very simple.  The reservoir takes 5L of liquid transfer fluid and has a stainless-steel coil that wraps around the sides and cools the liquid inside. This model has an inbuilt pump which then circulates the fluid around the coil and back into the reservoir to cool down again.


This website uses cookies to improve service. By using this site, you agree to this use.